Piers Dowell – Airbrush Master

Bikes & Murals

Call: 01568 750477

 

Terminator 3

Terminator 3

 

Remembrance - with Ewan McGregor

 

Rick Pearson

Riders of Bridgewater

Terminator 3

Jamie Williams

Jamie Williams

Floral Fire

Floral Fire

Richard Moore Chopper

Richard Moore Chopper

Snow Owl

Snow Owl

Milwaukee Belle

Milwaukee Belle

Wendy & Dave Grant

Wendy & Dave Grant

Mark Jones

Mark Jones

Karl Newman

Karl Newman

Nigel Reo Coker

Nigel Reo Coker

Safari Helmet

Safari Helmet

James R.I.P

James R.I.P

Valhalla

Valhalla

Fit Bear

Fit Bear

Richard Moore Softtail

Richard Moore Softtail

Unforgiven

Unforgiven

Posh & Becks

Posh & Becks

Devil Betty

Devil Betty

Martin Floyd

Martin Floyd

Tracey

Tracey

Ali, The Greatest

Ali, The Greatest

Diann

Diann

All American

All American

Harley Bros

Harley Bros

Custom Choppers

Custom Choppers

GSXR

GSXR

Joes Rose

Joes Rose

TVR Bonnet

A TVR bonnet painted for the, then owner of TVR, Nikolay Smolensky

Rosso Corsa

Jean Todt buys Rosso Corsa, Michael Schumacher approves!

Project Dreadnought

Project Dreadnought, The Story So Far

Leading Ladies

Leading Ladies

Blonde Bomber

Tracey

Great Escape

Great Escape

Andy Thurling

Andy Thurling

Del Saunders

Del Saunders

The Motto is – “to a quality not a price”
Mural and motorbike paint jobs occur over time – the process is complex, yet the outcome is stunning. After finalizing a design with computer mock ups the prep works begins. No short cuts here as the best finish in the world is useless without proper foundations. As a result of working by the ‘motto’ I’ve deduced that House of Kolor products are pretty much as good as it gets from primers to top coat. Bare metal panels are filled and spray filled then cured. This surface is sanded with 3M wet & dry when hard. Then it’s in with the primer. After curing then sanding again the colour is applied over a sealer which is sprayed onto the primer surface to provide a good adhesion to the colour and prevent bleed into the primer .A lot of painters don’t bother with this but it is an essential stage. The colour will then be coated in at least 3 coats of urethane clear coat. This will be sanded for either a top coat of clear or more colour in the form of a graphic design. If a design is the case it will be coated in a clear which will be sanded to a level surface, removing any edges created by the masking. This may be repeated several times for a complex design. When the design is complete the work is coated with a Hi flow urethane clear for low ‘orange peel’ effect. However this is never fully achieved and so the surface is sanded with 1500 grit and a firm block. It is then sanded with 2000 grit for easy compounding. Then it’s mechanically polished and then buffed. Then a hand polish and it’s all yours!