Bikes & Murals
Call: 01568 750477
-
Terminator 3
Terminator 3
-
Mick
-
Remembrance - with Ewan McGregor
-
Rick Pearson
-
Riders of Bridgewater
Riders of Bridgewater
-
UMA
UMA
-
Jamie Williams
Jamie Williams
-
Floral Fire
Floral Fire
-
Richard Moore Chopper
Richard Moore Chopper
-
Snow Owl
Snow Owl
-
Milwaukee Belle
Milwaukee Belle
-
Wendy & Dave Grant
Wendy & Dave Grant
-
Mark Jones
Mark Jones
-
Karl Newman
Karl Newman
-
Nigel Reo Coker
Nigel Reo Coker
-
Safari Helmet
Safari Helmet
-
James R.I.P
James R.I.P
-
Valhalla
Valhalla
-
Fit Bear
Fit Bear
-
Richard Moore Softtail
Richard Moore Softtail
-
Unforgiven
Unforgiven
-
Posh & Becks
Posh & Becks
-
Devil Betty
Devil Betty
-
Martin Floyd
Martin Floyd
-
Tracey
Tracey
-
Ali, The Greatest
Ali, The Greatest
-
Diann
Diann
-
All American
All American
-
Harley Bros
Harley Bros, Eagle Walker
-
Custom Choppers
Custom Choppers
-
GSXR
GSXR
-
Joes Rose
Joes Rose
-
TVR Bonnet
A TVR bonnet painted for the, then owner of TVR, Nikolay Smolensky
-
Rosso Corsa
Jean Todt buys Rosso Corsa, Michael Schumacher approves!
-
Project Dreadnought
Project Dreadnought, The Story So Far
-
Leading Ladies
Leading Ladies
-
Blonde Bomber
Blonde Bomber
-
Great Escape
Great Escape
-
Andy Thurling
Andy Thurling
-
Del Saunders
Del Saunders
1 / 40

- 1
- 2
The Motto is - "to a quality not a price"
Mural and motorbike paint jobs occur over time - the process is complex, yet the outcome is stunning. After finalizing a design with computer mock ups the prep works begins. No short cuts here as the best finish in the world is useless without proper foundations. As a result of working by the ‘motto’ I’ve deduced that House of Kolor products are pretty much as good as it gets from primers to top coat. Bare metal panels are filled and spray filled then cured. This surface is sanded with 3M wet & dry when hard. Then it’s in with the primer. After curing then sanding again the colour is applied over a sealer which is sprayed onto the primer surface to provide a good adhesion to the colour and prevent bleed into the primer .A lot of painters don’t bother with this but it is an essential stage. The colour will then be coated in at least 3 coats of urethane clear coat. This will be sanded for either a top coat of clear or more colour in the form of a graphic design. If a design is the case it will be coated in a clear which will be sanded to a level surface, removing any edges created by the masking. This may be repeated several times for a complex design. When the design is complete the work is coated with a Hi flow urethane clear for low ‘orange peel’ effect. However this is never fully achieved and so the surface is sanded with 1500 grit and a firm block. It is then sanded with 2000 grit for easy compounding. Then it’s mechanically polished and then buffed. Then a hand polish and it’s all yours!
Instagram Facebook Pinterest Youtube